2pcs CNHL Lipo Battery 7.4V 2S 2200mAh 30C 40C 70C With T Dean XT60 Plug for FPV Quadcopter Drone Airplane Helicopter Hobby Parts

Specification:

Model 1：2200mah 2S 11.1V 30C XT60-Plug
Stock Number：220302
Capacity：2200mAh
Voltage：7.4V / 2-Cell / 2S1P
Discharge Rate：30C Continual / 60C Burst
Charge Rate：5C Max
Size：18X36X108mm
Weight：127g
Output Connector：T/Dean Plug
Balance Connector：JST / XH
Remarks：N/A
Wire Size (AWG)：14#

Model 2：2200mah 2S 11.1V 40C XT60-Plug
Stock Number：220402
Capacity：2200mAh
Voltage：7.4V / 2-Cell / 2S1P
Discharge Rate：40C Continual / 80C Burst
Charge Rate：5C Max
Size：19X36X108mm
Weight：133g
Output Connector：T/Dean Plug
Balance Connector：JST / XH
Remarks：N/A
Wire Size (AWG)：14#

Model 3：2200mah 2S 11.1V 70C XT60-Plug
Stock Number：220702
Capacity：2200mAh
Voltage：7.4V / 2-Cell / 2S1P
Discharge Rate：70C Continual / 140C Burst
Charge Rate：5C Max
Size：18X35X108mm
Weight：120g
Output Connector：XT60
Balance Connector：JST / XH
Remarks：N/A
Wire Size (AWG)：12#

Feature：

1.Elected premium-grade materials.
2.Low-resistance, high-reliability, good consistency，Automatic stacking technology, better performance.
3.Lightweight and small size, long battery life, high specific power.
4.Great value without the loss of performance.

2200mAh For EPP 3D plane, small heli, QAV180/210, DJI Phantom Quadcopter, DJI Phantom FC40 Spare, Walkera E22, RC crawlers,katanas, 330’s, sbach, etc.

Notice：

1.For the RC battery, only if the voltage and the plug match, then it will fit.
2.Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3.To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4.If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.