2PCS CNHL 4S 14.8V Lipo Battery 1300mAh 1500mAh 1600mAh 1800mAh 120C Ministar Series With XT60 Plug For RC FPV Drone Quadcopter Helicopter Airplane

Specification:

Model 1:1300mah 4S 14.8V 120C XT60-Plug
Stock Number：1301204
Capacity ：1300mAh
Voltage：14.8V / 4-Cell / 4S1P
Discharge Rate：120C Continual / 240C Burst
Charge Rate：5C Max
Size：35.5X34.5X75mm
Weight ：170g (Including wire and connector)
Output Connector：XT60
Balance Connector：JST / XH
Remarks：N/A

Model 2:1500mah 4S 14.8V 120C XT60-Plug
Stock Number：1501204
Capacity ：1500mAh
Voltage：14.8V / 4-Cell / 4S1P
Discharge Rate：120C Continual / 240C Burst
Charge Rate：5C Max
Size：39.5X34.5X75mm
Weight ：189g (Including wire and connector)
Output Connector：XT60
Balance Connector：JST / XH
Remarks：N/A

Model 3:1800mah 4S 14.8V 120C XT60-Plug
Stock Number：1801204G
Capacity ：1800mAh
Voltage：14.8V / 4-Cell / 4S1P
Discharge Rate：120C Continual / 240C Burst
Charge Rate：5C Max
Size：38.5X34X86mm
Weight ：209g (Including wire and connector)
Output Connector：XT60
Balance Connector：JST / XH
Remarks：N/A

Application:

CNHL FPV lipo battery fit for FPV Drone Skylark m4-fpv250, MiniShredder 200, lndy250 plus mojo 280, Qav250, Vortex and Emaxnighthawk 250Nemesis 240 Mini, HOVERSHIP MHQ2(270)ZMR 250MiniH, QAV250, QAV180 1210, Danaus, Vortex 285, FLIP FPV FRAMEHOVERSHIP MHQ2.etc..

Notice：

1.For the RC battery, only if the voltage and the plug match, then it will fit.
2.Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3.To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4.If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.