CNHL 8S 29.6V 5000mah 6000mah Lipo Battery With XT90/QS8 Plug for Drone Quadcopter Airplane Agricultural Aircraft Multirotor

Specification:

1. Model：8S 5000mAh 70C XT90
Stock Number: 500708
Capacity: 5000mAh
Voltage: 29.6V / 8-Cell / 8S1P
Discharge Rate: 70C Continual / 140C Burst
Charge Rate: 5C Max
Size(1-5mm difference): 64X50X151mm
Approx Weight(±5g) : 976g
Output Connector: XT90
Balance Connector: JST-XH-9P
Wire (AWG): 10#
Package included: 1* CNHL G+Plus 5000mAh 29.6V 8S 70C Lipo Battery with XT90 Plug

2. Model：8S 5000mAh 70C QS8
Stock Number: 500708QS8
Capacity: 5000mAh
Voltage: 29.6V / 8-Cell / 8S1P
Discharge Rate: 70C Continual / 140C Burst
Charge Rate: 5C Max
Size(1-5mm difference): 64X50X151mm
Approx Weight(±5g) : 1000g
Output Connector: QS8
Balance Connector: JST-XH-9P
Wire (AWG): 8#
Package included: 1* CNHL G+Plus 5000mAh 29.6V 8S 70C Lipo Battery with QS8 Plug

3. Model：8S 6000mAh 70C XT90
Stock Number: 600708
Capacity: 6000mAh
Voltage: 29.6V / 8-Cell / 8S1P
Discharge Rate: 70C Continual / 140C Burst
Charge Rate: 5C Max
Size(1-5mm difference): 69X54X169mm
Approx Weight(±5g) : 1215g
Output Connector: XT90
Balance Connector: JST-XH-9P
Wire (AWG): 10#
Package included: 1* CNHL G+Plus 6000mAh 29.6V 8S 70C Lipo Battery with XT90 Plug

4. Model：8S 6000mAh 70C QS8
Stock Number: 600708QS8
Capacity: 6000mAh
Voltage: 29.6V / 8-Cell / 8S1P
Discharge Rate: 70C Continual / 140C Burst
Charge Rate: 5C Max
Size(1-5mm difference): 69X54X169mm
Approx Weight(±5g) : 1245g
Output Connector: QS8
Balance Connector: JST-XH-9P
Wire (AWG): 8#
Package included: 1* CNHL G+Plus 6000mAh 29.6V 8S 70C Lipo Battery with QS8 Plug

Compatible RC Models:

CNHL G+Plus 5000mAh 6000mAh 8S LiPo battery 70C with XT90 QS8 Plug is compatible with 7-8 inch 400mm-450mm X8 FPV, 10inch Xclass FPV, 1/7 1/8 scale vehicles, FMS EDF Jets and 3D Plane, Size 700mm to 800mm Helicopters, RC Airplane, MultiCopter, RC Boat, RC Hobbies etc.

Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3. To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.